Understanding Resilience from Redundancy

The distinction between network resilience and network redundancy may remain puzzling for many businesses, but the importance of understanding such differences is absolutely essential.

While a resilient network may contain some redundancy, a redundant system isn’t always resilient to a competent standard.

Redundancy is a process through which alternate or additional instances of network devices, utilities and equipment are installed within network infrastructure and other elements such as back-up generators, or alternate cooling circuits are brought in to support the smooth operation of the network. Typically, a redundant network duplicates critical elements and devices that keep the network running, so that if one path fails, another can be used. That’s fine as far as it goes – but it does not solve the problem of business continuity – far from it. After all, if there is a primary network failure or something goes wrong with any piece of equipment other than the redundant elements, the network remains down.

Just adding switches or routers will not resolve this issue. If an engineer cuts through a cable, the network may go down no matter how much duplicate equipment is in place. Redundancy can often be expensive too. Unsurprisingly, organisations often baulk at spending large sums on data connections that will be idle most of the time. 

If a business is serious about maximising network uptime, it has to go beyond redundant equipment. That’s where end-to-end resilience is so important. Resilience is all about recovering quickly to ensure that the company is operating normally soon after a network outage. 

Part of this is knowing there is a problem in the first place. Many organisations today face issues in being able to quickly identify and remediate reliability or resilience issues. Again, redundancy on its own won’t deliver this awareness, but resilience can.

Take a large organisation with a Network Operations Centre. They may have lots of offices around the world with attendant time zone issues. As a result, they may struggle to get visibility that an outage has even occurred because they are not proactively notified if something goes offline. Even when they are aware, it may be difficult to understand which piece of equipment at which location has a problem if nobody is on site to physically look.

True network resilience is not just about providing resilience to a single piece of equipment whether that be a router or core switch for example. In a global economy it is important that any such solution can plug into all of the equipment at any data centre or edge site, map it and establish what is online and offline at any given time.

That enables a system reboot to be quickly carried out remotely. If that does not work, it might well be that an issue with a software update is the root of the problem. With the latest smart out-of-band (OOB) management devices this can be readily addressed, because an image of the core equipment and its configuration can be retained, and the device quickly rebuilt remotely without the need for an engineer visit. In the event of an outage, therefore, it is possible to deliver network resilience via failover to cellular, while the original fault is remotely addressed, enabling business continuity even while the primary network is down.

Building in resilience through the OOB approach costs money but it is money well spent.  You might use this alternate access path infrequently but when you need it, you really need it. Moreover, resilience is typically far cheaper than having to buy in large volumes of redundant equipment, for example. This is increasingly the case as the deployment of edge locations increases. An organisation may be able to afford redundancy at a core data centre, powering multiple businesses and processes but that same redundancy can’t be built in to every data rack or data closet at a small remote location.

So in summary, network redundancy can help businesses mitigate the risk of unplanned outages and help ensure business continuity but it does not necessarily bring resilience. Simply implementing redundant equipment will never ensure that a business can get its full network ecosystem from core to edge up and running normally again quickly. Ultimately, it is having that resilience in place that is key to businesses.  After all, networks are the fundamental ‘backbone’ to the success of organisations today, and many businesses will benefit from bringing network resilience into the heart of their approach from the very outset.


About the Author

Steve Cummins, VP at Opengear. A B2B Technology Marketing Executive with extensive Product Management, Marketing Communication and Business Development skills; I’m an enthusiastic early adopter of new marketing channels, and have worked and traveled extensively in Europe and Asia.

Featured Image: ©Alexey Novikov

  • you might also like